|
Freehand raven
|
2019-09-13 11:36:00-07:00 |
| On the chassis of the garage dread: It's covered in gloss coat, so I can add some oil-based weathering... |
|
Garage dread: chipping and insignia
|
2019-09-12 09:57:00-07:00 |
| Slapped some chipping and insignia on the garage dread. Basically, the same process as the Raptor's chipping, but I went a step further and added ... |
|
Garage dread wip
|
2019-09-11 10:43:00.002000-07:00 |
| He is getting the rough and ready treatment. Needs some insignias and then a ton of weathering. Because of the rough cast, with visible bubbles ... |
|
A visit to the Dentist
|
2019-08-22 13:32:00.002000-07:00 |
| Cast some skulls from the master model, then drilled the chain feed channels out. Say aaaaaaah The buildlog has more photos of the casting process... |
|
Skulls skulls skulls
|
2019-08-20 09:41:00-07:00 |
| In the future there is only skulls Some wip on the dreadnought diorama. More photos over at the buildlog . Also instagram ... |
|
Diorama progress
|
2019-08-14 22:38:00.001000-07:00 |
| Made some progress on the dreadnought diorama. Power fist: Cog Mechanicum: Diorama setup: Still lots to do..... |
|
Dreadnought occupant
|
2019-08-07 12:14:00.002000-07:00 |
| Here is some wip on the dreadnought I'm building. This will be the occupant. Or at least, what remains of him... |
|
Dreadnought, take 2
|
2019-03-20 11:36:00-07:00 |
| The previous dreadnought I built was pretty much straight up from the Drednoyt III Patoroch template, and it worked out pretty well: I even made ... |
|
Weekend basing
|
2018-12-17 13:26:00-08:00 |
| Spent the weekend basing the couple of models I have made: The dready also got a base: All primed and ready to go: Looks like ... |
|
Primed and gap-filled dready
|
2018-12-11 10:36:00.002000-08:00 |
| A coat of gray primer showed up a fair amount of tiny bubbles on the surface of the parts, again more so toward the parts ... |
|
Dreadnought proto clone
|
2018-12-05 22:22:00-08:00 |
| Finally, I've got all the molds together to cast one of these: The hand took the longest to properly mold. Because I am using caulking ... |
|
Molding & Casting
|
2018-12-05 14:35:00-08:00 |
| Here is the progress I've made in making molds and casting resin parts for this figure. Minus the left hand - this gave me a ... |
|
Power fist
|
2018-11-06 10:47:00-08:00 |
| The mold is complete, so I removed the parts from it. They only suffered minimal damage, nothing a bit of CA couldn't fix. Started building ... |
|
Prime, bake & mold
|
2018-11-05 12:09:00-08:00 |
| So here is the primed body of the dreadnought - it looks a tad cleaner this way I did this last night, then took the ... |
|
Bulking out
|
2018-11-02 15:02:00-08:00 |
| Some more progress: bulking out the... bulkheads?The body fits together nicely. Adding more detail to the feet... |